#ARDUINO NANO MINI USB PINOUT SCHEMATIC SOFTWARE#

Even though the hardware has this feature, the Arduino software doesn’t have this by default. These pins support synchronous communication with SCK as the synchronizing clock.

#ARDUINO NANO MINI USB PINOUT SCHEMATIC SERIAL#

When you don’t want the data to be transmitted asynchronously you can use these Serial Peripheral Interface pins. These pins can be used to trigger three types of interrupts such as interrupt on a low value, a rising or falling edge interrupt and a change in value interrupt. These pins can be used to enable interrupts INT0 and INT1 respectively by using the attachInterrupt () function. When we need to provide an external interrupt to other processor or controller we can make use of these pins. The PWM signal can be generated using analogWrite () function. PWM Pins Pins - 6, 8, 9, 12, 13, and 14Įach of these digital pins provide a Pulse Width Modulation signal of 8-bit resolution. The pins RX and TX are connected to the corresponding pins of the USB-to-TTL Serial chip. These two pins RX- receive and TX- transmit are used for TTL serial data communication. Serial Communication Pins Pins - 1, 2 1 - RX and 2 - TX Other than the digital input and output functions, the digital pins have some additional functionality as well. See Also Arduino Mega Pinout | Arduino Mega 2560 Layout, Specifications Digital I/O, PWM - 14 PinsFor Analog Functions - 9 PinsPower - 7 PinsSPI (Apart from Digital I/O Section) - 3 PinsReset - 3 Pins_ TOTAL - 36 PinsĪrduino Nano Pin Description Arduino Nan0 – Pin Description We will see all the pins section wise as well as a detailed format at last. We can infer from the image that Arduino Nano got 36 pins in total.

#ARDUINO NANO MINI USB PINOUT SCHEMATIC FULL#

See Also The Full Arduino Uno Pinout Guide Arduino Nano Pinout, Board Layout, Specifications, Pin Description Arduino Nano Guide (Pinout, Specifications, Examples) - NerdyTechy Arduino Nano Pinout: Specifications, Pin Descriptions, and Programming The fascinating feature in Nano is that it will choose the strongest power source with its potential difference, and the power source selecting jumper is invalid.

This port is used for both programming and serial monitoring. The Nano board doesn’t have a DC power jack as other Arduino boards, but instead has a mini-USB port. The extra 2 pins of Arduino Nano serve for the ADC functionalities, while UNO has 6 ADC ports but Nano has 8 ADC ports.

The main difference between them is that the UNO board is presented in PDIP (Plastic Dual-In-line Package) form with 30 pins and Nano is available in TQFP (plastic quad flat pack) with 32 pins. The Nano is inbuilt with the ATmega328P microcontroller, same as the Arduino UNO. This article discusses about the technical specs most importantly the pinout and functions of each and every pin in the Arduino Nano board.Īrduino Nano has similar functionalities as Arduino Duemilanove but with a different package. The Nano board weighs around 7 grams with dimensions of 4.5 cms to 1.8 cms (L to B). The Arduino Nano, as the name suggests is a compact, complete and bread-board friendly microcontroller board.

Arduino nano mini usb pinout schematic